Tap the "Image Orientation" key with the same orientation as the original
image.
If this setting is not correct, a suitable image may not be transmitted.
After the settings are completed, tap .
To configure the default setting of image orientation, select [System Settings] in "Setting
mode", then [Image Send Settings] → [Operation Settings] → [Default Settings] →
[Image Orientation].
The ratio used for reduction or enlargement of the original will appear between the "Scan
Size" and the "Send Size".
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
588 of 1441 3/17/2016 7:14 AM
To Next Page
