RECEIVING A FAX MANUALLY
Overview
A fax can be received manually using the touch panel (manually).
Operation
Tap the [Speaker] key or pick up the receiver of extension telephone while
the telephone is ringing.
When the [Speaker] key is tapped, the [Manual Reception] and appear.
When answering the telephone by tapping the [Speaker] key, you will be able to
hear the voice of the caller, but you will not be able to speak.
You can receive a fax after answering a call on an extension telephone. Remote
reception can also be used to receive a fax.
RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION
TELEPHONE (REMOTE RECEPTION)
To switch between auto reception and manual reception modes:
In "Setting mode", select [System Settings] → [Receive/Forward Settings] → [Fax
Settings] → [Receive Settings].
Adjust the volume by using the slider that is displayed when you tap the [Speaker
Volume] key or using .
If the received fax data remains unprinted, it will cause the fax memory to fill up,
which may prevent some faxes from being received. If this function is enabled, you
should print the received data as soon as possible without leaving it in the fax
memory.
You can view the remaining fax memory capacity on the fax mode base screen.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
595 of 1441 3/17/2016 7:14 AM
To Next Page
