Select [Forward to All Forward Destinations] or [Forward based on the Conditions
of Forward Destination 1-3].
Select the sender whose faxes will be forwarded.
To forward all received data, select [Forward All Received Data].
To forward only data received from specific senders, select [Forward
Received Data from Below Sender]. To forward all data except data from
specific senders, select [Forward Received Data from Senders except
Below]. Select the appropriate senders from the list and click the [Add]
button.
Select the forwarding conditions.
To always forward received data, select [Always Forward].
To specify a day and time on which received data will be forwarded, select
[Forward on Selected Day & Time] and select the checkbox ( ) of the
desired day of the week. To specify a time, select the [Set Forwarding
Time] checkbox ( ) and specify the time.
Select the file format.
The format can be set separately for each forwarding address (for each of
forwarding addresses 1, 2, and 3 in the table).
When selecting senders from the "Sender Number/Address Setting" list, you can use the
[Shift] key or the [Ctrl] key on your keyboard to select multiple senders.
Up to three forwarding day and time settings can be set for one forwarding table, and a
forwarding destination can be set for each set time. To configure these settings, use the
[Forwarding Destination List] tabs to access each setting.
Images forwarded in TIFF format may not be displayed correctly in some recipient
environments. In this event, change the file format to PDF.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
610 of 1441 3/17/2016 7:14 AM
To Next Page
