Click [Sender Number/Address Registration] in the [Inbound Routing Settings]
menu in the "Setting mode".
Enter the sender address or fax number in "Internet Fax Address" or "Fax
Number" as appropriate, and click the [Add to List] button.
The entered address will be added to the "Entered sender address or fax
number" list.
Enter the address directly (maximum of 1500 characters) or select the address
from a global address book by clicking the [Global Address Search] button.
To store multiple sender addresses or fax numbers, repeat these steps.
When you have finished adding addresses, click the [Store] button.
Click [Inbound Routing Settings] in the "Setting mode" menu and click the
[Add] button.
Enter a "Table Name".
Select the forwarding conditions.
error box of forwarding received data] key on the action panel
*
.
* To perform this operation, the user must have [Access to Fax Data] permission.
If you wish to have only faxes from specified addresses forwarded, store the
desired sender addresses. Send addresses stored here can be selected from a list
when you store a forwarding table.
A maximum of 500 sender numbers/addresses can be stored.
To delete an entered address, select the address in "Address to be Entered" and
click the [Delete] button.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
609 of 1441 3/17/2016 7:14 AM
To Next Page
