Operation
In "Setting mode", click [Application Settings] ā [Inbound Routing Settings]
ā [Administration Settings].
In "Forward Received Data", select [Valid] and click the [Store] button.
This function cannot be used for faxes received by confidential reception.
When faxes forwarded using this function are printed at the forwarding
destination, the date and time of reception cannot be printed on the faxes.
("Receiving Date & Time Print" is disabled.)
The received data is not forwarded to a hyperlink destination that is registered in
the specified address.
Like fax reception printing, the image is automatically reduced so that the page is
not divided into multiple pages due to the header.
Users without administrator rights can be prohibited from storing, editing, and deleting
forwarding tables in this screen, and from specifying which table is used. To do so, set the
checkboxes for the following items to .
Disable Registration of Forward Table
Disable Change/Delete of Forward Table
Disable Change of Forward Approval
Specify in [Print Style Setting] whether or not to have the machine to print the faxes to
forward when inbound routing is enabled. After the settings are completed, be sure to click
the [Store] button.
[Always Print]: Always prints received data before forwarding the data.
[Print at Error]: Prints received data only when an error prevents forwarding.
[Save Only at Error]: Saves received data only when an error prevents forwarding.
For the saved data, the error address can be confirmed and the data can be
resent. From the [Scanner] or [Fax] tab in the job status screen, tap the [Check
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
608 of 1441 3/17/2016 7:14 AM
To Next Page
