Tap the [Others] key, and tap the [Own Name Select] key.
Tap the sender information key to specify the sender information used for own
number sending.
After the settings are completed, tap .
Tap the [Start] key to start scanning of the original.
If you inserted the original pages in the document feeder tray, all pages are
scanned.
A beep will sound to indicate that scanning has ended, and the machine
stands by for transmission.
If you placed the original on the document glass, scan each page one at a
time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning has ended, and the machine
stands by for transmission.
To cancel the sender information settings:
Tap the [Clear] key.
Tap the [Preview] key to preview the output image before sending it. After you have
scanned an original by tapping the [Preview] key, tap the [Additional Scan] key to scan the
next original. Tap the [Start] key to start sending an image.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
659 of 1441 3/17/2016 7:14 AM
To Next Page
