Sharp MX-M365N - Page 658

TEMPORARILY CHANGING THE SENDER
INFORMATION
(OWN NAME SELECT)
Overview
You can temporarily change sender information to be used in the own number sending by
selecting from data stored separately.
Operation
Place the original.
Place the original in the document feeder tray of the automatic document feeder,
or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Specify the destination fax number.
ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
RETRIEVING A DESTINATION NUMBER FROM AN ADDRESS BOOK
THE SELECTED DESTINATIONS
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
RETRIEVING A DESTINATION NUMBER FROM A GLOBAL ADDRESS
BOOK
USING A TRANSMISSION LOG TO RESEND
SENDING BY CHAIN DIALING
The function is released when the transmission with the changed sender information ends.
To store the sender information to be used for Own Name Select function:
In "Setting mode (administrator)", select [System Settings] → [Image Send Settings] →
[Operation Settings] → [Own Name and Destination Set] → [Registration of Own Name
Select].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
658 of 1441 3/17/2016 7:14 AM