Sharp MX-M365N - Page 665

CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT
(TRANSACTION REPORT)
Overview
A transaction report is automatically printed out to alert you when a transmission fails or
when a broadcast transmission is performed.
The transaction report contains a description of the transmission (date, start time, name
of other party, time required, number of pages, result, etc.).
INFORMATION APPEARING IN THE RESULT COLUMN
Transaction reports are printed based on conditions set in the setting mode; however,
you can temporarily select different conditions for a transmission.
Operation
Place the original.
Place the original in the document feeder tray of the automatic document feeder,
or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Transaction reports are printed based on conditions set in "Setting mode";
however, you can temporarily select different conditions for a transmission.
For a broadcast transmission, changes to the transaction report print conditions
apply to all destinations.
To set the printing conditions of transaction report:
In "Setting mode (administrator)", select [System Settings] → [Image Send Settings] →
[Fax Settings] → [Default Settings] → [Transaction Report Print Select Setting].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
665 of 1441 3/17/2016 7:14 AM