Sharp MX-M365N - Page 678

F-CODE DIALING
When performing an F-code operation, the F-code (sub-address and passcode) is
appended to the fax number that is dialed. Check the F-code (sub-address and passcode)
stored in the memory box in the other machine before you perform an F-code
transmission. It is convenient to store an F-code (sub-address and passcode) together
with the fax number in a one-touch key or group key.
To use the following F-code communication functions, your machine must dial the other
machine.
F-CODE CONFIDENTIAL TRANSMISSION
F-code polling reception
F-code relay request transmission
To use the following F-code communication functions, the other machine must dial your
machine.
F-code confidential reception
F-code polling memory
F-code relay broadcast transmission
If the destination machine does not have a passcode configured in the F-code, do not enter
a passcode when dialing that machine.
Communication using the F-code (sub-address and passcode) is not available when dialing
using a speaker or manual transmission.
To store and edit one-touch keys and group keys:
Select [Address Book] in "Setting mode".
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
678 of 1441 3/17/2016 7:14 AM