POLLING RECEPTION USING F-CODES
Overview
This function enables your machine to call another machine and initiate reception of a
fax stored in an F-code memory box (polling memory) in the other machine. During the
polling operation, your machine must correctly specify the F-code (sub-address and
passcode) configured in the other machine. Otherwise, polling reception will not take
place.
Verify the F-code (sub-address and passcode) of the memory box in the other
machine before you perform F-code polling reception.
The receiving machine bears the telephone charges of the transmission.
If necessary, use the F-code polling reception in combination with a broadcast
transmission or timer transmission. Only one polling reception with a timer setting
can be stored at a time.
SPECIFYING THE TIME FOR COMMUNICATION
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
685 of 1441 3/17/2016 7:14 AM
To Next Page
