Operation
Tap the [Others] key, and tap the [Polling] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
Specify the destination fax number
Polling multiple machines (serial polling) is not possible.
Make sure there is no original in the machine when using the F-code for the
polling reception function.
The polling reception using the F-code cannot be registered as a "favorite" item.
To cancel the Polling setting:
Tap the [Polling] key to clear the checkmark.
Enter the destination line number using the numeric keys.(1)
Tap the [Sub Address] key.
Symbol "/" is entered.
(2)
Enter the sub-address using the numeric keys.(3)
Tap the [Passcode] key.
Symbol "/" is entered.
(4)
Enter the passcode using the numeric keys.(5)
If the sub-address and passcode are already registered, you can select a
one-touch key as well.
If the passcode is omitted for the memory box of destination machine, you
can skip Steps (4) and (5).
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
686 of 1441 3/17/2016 7:14 AM
To Next Page
