SCANNING A DOCUMENT INTO A MEMORY
BOX FOR F-CODE POLLING TRANSMISSION
Overview
When your machine receives a transmission request from another machine, this function
sends a fax stored in an F-code memory box (polling memory) in your machine to that
machine. The other machine must correctly specify the F-code (sub-address and
passcode) configured in your machine. Otherwise, transmission will not take place.
An original to be sent to the other machine using F-code polling communication must be
previously scanned into an F-code memory box (polling memory) in your machine.
If other documents have already been stored in the memory box, the document is
added to the previously stored documents.
By factory default, the document sent to the other machine will be deleted
automatically.
To perform this operation, the user must have [Access to Fax Data] permission.
To create F-code memory boxes:
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
688 of 1441 3/17/2016 7:14 AM
To Next Page
