Operation
Place the original.
Place the original in the document feeder tray of the automatic document feeder,
or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Tap the [Others] key, and tap the [Memory Box] key.
Tap the [Polling Memory] tab.
Tap the key of the F-code memory box (polling memory)
Tap the [Change Number of Times] key on the action panel, and set the
polling times
To erase the original after its transmission, tap the [Once] key. To repeat
transmitting an original, tap the [Unlimited] key. Change the settings as
necessary.
After the settings are completed, tap and key.
Tap the [Start] key to start scanning of the original
If you inserted the original pages in the document feeder tray, all pages are
scanned.
When you place the original on the document glass, scan each page one at a time.
After you have scanned the last original, tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
In "Setting mode", select [System Settings] → [F-Code Memory Box].
You cannot set the Program, Timer, Transaction Report, Polling, and Document
Filing.
Tap the [Preview] key to preview the output image before sending it. After you
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
689 of 1441 3/17/2016 7:14 AM
To Next Page
