Prior to carrying out the operation, inform the requesting party, who you will
communicate with using F-code relay request transmission, of the sub-address and
passcode of the F-code relay broadcast memory box in your machine
Program the destination machines in the F-code relay broadcast memory box when
you create the box in your machine.
CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE
COMMUNICATION
It is not necessary for the destination machines to support F-code communication.
The machine that requests a relay broadcast transmission only bears the cost of
sending the fax to your machine (the relay machine). Your machine bears the cost of
sending the fax to each of the destination machines.
When faxes forwarded using this function are printed at the forwarding destination, the date
and time of reception cannot be printed on the faxes. ("Receiving Date & Time Print" is
disabled.)
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
698 of 1441 3/17/2016 7:14 AM
To Next Page
