onnection when polled because no data was in memory.
NO F-CODE POLL The other machine refused an F-code polling operation, or your machine brok
e the connection when polled because no data was in its F-code memory polli
ng box.
RX POLL# NG The connection was broken because the sub-address for F-code polling mem
ory was not valid.
F POLL PASS# NG The connection was broken because the passcode for F-code polling memory
was not valid.
BOX NO. NG Your machine broke the connection because the specified sub-address for an
F-code memory box does not exist.
F PASS# NG Your machine broke the connection because the other machine sent an incor
rect passcode for F-code communication.
RX NO F-CODE P
OLL
F-code polling was attempted, however, the other machine did not have an F-
code polling memory box.
NO F FUNC F-code communication was attempted, however, the other machine does not
support F-code communication.
NO F-CODE F-code communication was refused by the other machine because of an inco
rrect sub-address or other reason.
M. BOX: [xxxxxx] *
*****
Data was received and stored in a confidential or relay broadcast memory box,
or data was sent from a memory polling box.
The name of the memory box appears in [xxxxxx], and the type of F-code ope
ration (relay request reception, polling memory transmission, or confidential re
ception) appears in ******.
FAIL xx (xxxx) The transaction failed due to a communication error.
First 2 digits of communication error number: Error code from 00 to 99.
Last 4 digits of communication error number: Code for use by service technici
ans.
Reject Reception A fax was sent from a party from which reception is blocked.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
707 of 1441 3/17/2016 7:14 AM
To Next Page
