Storing sender information
Before using Scan to E-mail
Store a default sender name in "Sender Name" and a reply e-mail address in "Reply
E-mail Address". These will be used in the case when a sender is not selected.
Before using Internet fax
Store a sender name in "Sender Name" and a sender Internet fax address in "Own
Address".
Configuring settings required in the setting mode
Configure server settings, default settings for the network scanner, and settings for
Internet Fax.
Settings] to disable the [Disabling of Clock Adjustment] setting.
To store the sender's name and e-mail address that are used when a sender is not
selected:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Scan
Settings] → [Scan Settings] → [Default Sender Set].
To store the sender's name and address:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Operation
Settings] → [Own Number and Name Set] → [Sender Data Registration].
To configure server settings:
In "Setting mode", select [Network Settings] → [Services Settings].
(Administrator rights are required.)
To configure basic settings for the network scanner:
In "Setting mode", select [Application Settings] → [Network Scanner
Settings]. (Administrator rights are required.)
To configure settings for Internet Fax:
In "Setting mode", select [Application Settings] and then configure options
in [Internet Fax Settings]. (Administrator rights are required.)
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
711 of 1441 3/17/2016 7:14 AM
To Next Page
