To set the number of recall attempts and the interval between attempts when a transmission
fails due to an error:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Internet Fax
Settings] → [Send Settings] → [Recall in Case of Communication Error].
The factory default setting is two attempts at 3-minute intervals.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
715 of 1441 3/17/2016 7:14 AM
To Next Page
