Sharp MX-M365N - Page 716

SELECTING NETWORK SCANNER MODE
You can select the network scanner mode from the Home Screen or from each operation mode as
follows:
Operation
Changing modes from the Home Screen
Tap one of [E-mail], [FTP/Desktop], [Network Folder], and [Internet Fax].
The initial screen of the selected mode is displayed.
Changing mode from each mode
By default, the screen changes to the fax mode screen.
The initial screen of the selected mode is displayed.
Tap the icon indicating the network scanner mode
Tap on the mode display
Tap [Image Send]
To change the screen that is initially displayed when the [Image Send] in the mode
display is tapped:
In "Setting mode (administrator)", select [System Settings] → [Image Send Settings] →
[Operation Settings] → [Default Settings] → [Default Display Setting].
Tap and then tap one of [E-mail], [FTP/Desktop], [Network Folder], and [Internet
Fax]
In "Setting mode", by selecting [System Settings] → [Image Send Settings] → [Fax Settings]
→ [Default Settings] → [Address Book Default Selection] and setting the [Higher priority is
given to the display of address book.] checkbox to , the Address Book in the selected mode
is displayed.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
716 of 1441 3/17/2016 7:14 AM