SENDING AN IMAGE IN SCAN MODE
Overview
An image can be sent in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and
Scan to Network Folder).
Operation
Place the original.
Place the original in the document feeder tray of the automatic document feeder,
or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
If the memory becomes full while the originals are being scanned, a message will
appear and scanning will stop.
When performing Scan to E-mail, take care not to send a file that is too large. In
particular, multi-page files tend to be large. When sending a multi-page file or
other large file, it may be necessary to reduce the number of scanned pages or
reduce the send size.
Do not place any objects under the original size detector. Closing the automatic document
feeder with an object underneath may damage the original size detector plate and prevent
correct detection of the document size.
When placing the originals, orient them as shown below.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
738 of 1441 3/17/2016 7:14 AM