EasyManua.ls Logo

Sharp MX-M365N - Page 743

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHANGING THE SUBJECT, FILE NAME,
REPLY-TO, AND BODY TEXT AT THE TIME OF
SCAN TRANSMISSION
Overview
Change the subject, file name, reply-to, and body text when performing a scan
transmission. If necessary, directly enter the text.
Operation
To change the subject, tap the [Subject] entry box.
Tap a pre-set text key.
After the settings are completed, tap .
When performing Scan to FTP, Scan to Desktop, or Scan to Network Folder, only
the file name is used.
If the subject or file name is not changed, the settings in [Application Settings] →
[Network Scanner Settings] in "Setting mode" are used.
If the reply-to address is not changed, the settings in [System Settings] →
[Image Send Settings] → [Scan Settings] → [Default Sender Set] in "Setting
mode" are used.
If this is not configured, the reply address configured in [Network Settings] →
[Services Settings] → [SMTP Settings] → [Reply Address] in the "Setting
mode" is used. (Administrator rights are required.)
To configure the candidates for the subject, file name, and body text, select
[Application Settings] and then [Network Scanner Settings] in "Setting mode".
To cancel the selection of the subject:
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
743 of 1441 3/17/2016 7:14 AM