EasyManua.ls Logo

Sharp MX-M365N - Page 777

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHANGING THE RESOLUTION
Overview
Specify the resolution setting.
How to select the resolution
For normal text originals, 200 x 200 dpi (200 x 100 dpi in Internet fax mode) produces an
image that is sufficiently legible.
For photos and illustrations, a high resolution setting (600 x 600 dpi, etc.) will produce a
sharp image.
However, a high resolution setting will result in a large file, and if the file is too large,
transmission may not be possible. In this event, reduce the number of pages scanned or
take other measures to decrease the file size.
CHANGING FORMAT IN SCAN OR DATA ENTRY MODE
CHANGING FORMAT IN INTERNET FAX MODE
SPECIFYING THE SEND SIZE OF THE IMAGE
Operation
Tap the [Resolution] key.
Tap the key of the desired resolution.
When using the automatic document feeder, the resolution setting cannot be changed
after scanning has begun. (However, when "Job Build" is used in Others, change the
resolution each time a new set of originals is inserted.)
When using the document glass to scan multiple original pages, change the
resolution setting each time you change pages.
When [TIFF-S] is selected for the format in Internet fax mode, only [200x100dpi]
or [200x200dpi] can be selected.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
777 of 1441 3/17/2016 7:14 AM