Tap the [Start] key, and scan the front side.
Place a card face up on the document glass, and tap the [Start] key to scan
the reverse side.
Tap the [Read-End] key.
"SPECIFYING THE SEND SIZE OF THE IMAGE".
To cancel the Card Shot settings:
Tap the [Off] key.
Tap the [Preview] key to check the preview of an image before sending a fax. For more
information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However, settings for
this function cannot be changed in the preview screen.
Before scanning the back of the card, tap the [Change Setting] key on the touch panel to
change the exposure.
If you will continue by scanning the front of the card, you can tap the [Change Setting]
key to change the exposure, resolution, scan size, and send size.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
799 of 1441 3/17/2016 7:14 AM