Place originals in the automatic document feeder.
The original can also be placed on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Specify the destination.
RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
VIEWING A LIST OF THE SELECTED DESTINATIONS
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
ENTERING AN ADDRESS MANUALLY
SPECIFYING A NETWORK FOLDER
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
USING A TRANSMISSION LOG TO RESEND
Tap the [Job Build] key.
A checkmark appears on the icon.
Tap the [Start] key to scan the first set.
Place the next set of originals and tap the [Additionally Scan] key.
To cancel the Job Build setting:
Tap the [Job Build] key to clear the checkmark.
Tap the [Preview] key to check the preview of an image before sending a fax. For more
information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However, settings for
this function cannot be changed in the preview screen.
To cancel scanning the original:
Tap ([Cancel Scan] key). All scanned data will be cleared.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
801 of 1441 3/17/2016 7:14 AM