Tap the [Start Sending] key.
If no action is taken for one minute after the confirmation screen is displayed,
scanning automatically ends and the transmission is reserved.
The [Change Setting] key can be tapped to change the exposure, resolution, scan
size, and send size for each original page scanned. However, when Job Build is
used in combination with "2in1" in "Others", only the exposure can be changed
when scanning each even-numbered page of the original pages.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
802 of 1441 3/17/2016 7:14 AM