EasyManua.ls Logo

Sharp MX-M365N - Page 814

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tap the [Others] key, and tap the [Sharpness] key.
Tap or slide the slider to adjust the sharpness.
After the settings are completed, tap and [Back] keys in sequence.
Tap the [Start] key to start scanning of the original.
If you inserted the original pages in the document feeder tray, all pages are
scanned.
A beep will sound to indicate that scanning and transmission have ended.
If you placed the original on the document glass, scan each page one at a
time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the
[Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
To cancel the sharpness settings:
Tap the [Off] key.
Tap the [Preview] key to check the preview of an image before sending a fax. For more
information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However, settings for
this function cannot be changed in the preview screen.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
814 of 1441 3/17/2016 7:14 AM