SPECIFYING A NETWORK FOLDER
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
USING A TRANSMISSION LOG TO RESEND
Tap the [Others] key, and tap the [Erase] key.
Tap the checkbox of the edge that you wish to erase, and specify the erase
position.
Check that he tapped checkbox is set to .
If the [Specify Frame] key is tapped, the [Up], [Down], [Left], and [Right]
checkboxes are set to .
If the [Specify Frame+Center] key is tapped, all the checkboxes are set to .
Specify the erase width.
Specify the erase edge on the reverse side when erasing edges of one to three sides of
Up, Down, Left, and Right on the front side to scan a 2-sided original.
If the [Reverse erase position of back face.] checkbox is set to , the edge in
the position opposite to the erased edge on the front side will be erased.
If the [Reverse erase position of back face.] checkbox is set to , the edge in
the same position as on the front side will be erased.
Tap the numeric value display indicating the margin shift area on the front side or
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
819 of 1441 3/17/2016 7:14 AM