METADATA DELIVERY USING SCAN TO
DESKTOP
When Network Scanner Tool is used in its factory default configuration, a file will be
generated with a new file name on the PC.
When Network Scanner Tool is used as a means of sending a metadata file to a third party
application, this setting must be disabled to allow cross referencing between the image file
and XML file by means of the file name generated by the computer. (When setting the file
name in [Options], to ensure that an existing file on the PC is not overwritten by a
transmitted file of the same name, be sure to configure the file name so that name
duplication will not occur; for example, by including a unique extension (the date, etc.) in
the generated file name. If the file name setting is left blank, the machine will automatically
generate a unique file name.)
It is recommended that you use Network Scanner Tool to receive metadata.
For more information, see the Network Scanner Tool User's Guide (PDF format) on the
"Sharpdesk/Network Scanner Utilities" CD-ROM. For information on the license agreement
and how to use the CD-ROM that accompanies the application integration module, see the
separate "Sharpdesk license kit" manual.
Using third party applications
Various types of third party applications exist. Some applications can start automatically from
Network Scanner Tool and some cannot.
When the auto-run function of an application is enabled, Network Scanner Tool will start the
application with the ".exe" command using the image file name as a parameter.
For example, when Network Scanner Tool is set to start application "APP.EXE", the
"APP.EXE IMG.TIF" command is applied.
If a file was specified to receive metadata, the metadata file name cannot be specified at the
same time using the command to start the application directly.
(However, the metadata file is stored in the same folder as IMG.TIF in the computer.)
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
869 of 1441 3/17/2016 7:14 AM