TRANSMITTING METADATA
Overview
Select a metadata set, enter each item, and perform metadata delivery.
Operation
Tap the [Data Entry] icon on the [Home Screen], and tap the [Metadata
Entry] key on the action panel.
Tap the key for the desired metadata set.
Metadata delivery is performed using the document filing function. The [Data Entry] tab
appears in the transmission settings screen of document filing mode to allow metadata
delivery.
In addition, perform metadata delivery using document filing in [Document Operations] in
"Setting mode (Web version)."
In data entry mode, configure metadata settings to perform metadata delivery.
To perform transmission without sending metadata, switch the screen from data
entry mode to a different mode and then perform transmission.
When metadata settings have been configured or an address is specified in data
entry mode, it will not be possible to switch to another mode.
Before configuring metadata settings, specify addresses in all available modes.
After metadata settings have been configured, specify only addresses in modes
that are allowed in the selected metadata.
If a specific metadata set has been specified as the default set, go to step 3.
If no metadata sets have been stored, Metadata Entry is unavailable. Store metadata set in
the setting mode (Web version) before performing transmission.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
870 of 1441 3/17/2016 7:14 AM