Tap the [OK] key.
If the entered login name and password are authenticated, the number of
remaining pages that the user can copy or scan is displayed.
When registering the LDAP server, change the information for [Authenticate to:] as
required.
When selecting from the User List screen:
The LDAP server you are connecting to has been registered upon user
registration, and so the target server to which authentication should be directed
appears when the login name is selected.
Go to step 3.
When entering from the soft keyboard:
Tap [Authenticate to:] and select the LDAP server to log in.
When a limitation is set for the number of pages that a user can use, the use count for the
user that has logged in is displayed.
To limit the number of pages that a user can use:
In "Setting mode", select [User Control] → [Page Limit Group List].
To hide the number of pages that can be used after login:
In "Setting mode", disable [User Control] → [Default Settings] → [Display Usage
Status after Login].
To change the message display time:
In "Setting mode", select [System Settings] → [Operation Settings] → [Message
Time Setting].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
95 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
