Sharp MX-M502N

1-106
BEFORE USING THE MACHINE
Contents
When using a port created with "Standard TCP/IP Port"
In the screen that appears after you click the [Configure Port] button in the screen of step 3, make sure the [SNMP
Status Enabled] checkbox is not selected ( ). If the [SNMP Status Enabled] checkbox is selected ( ), it may not be
possible to print correctly.
6
Configure the port settings.
(1) Select [LPR].
(2) Enter [lp].
(3) Click the [OK] button.
7
Click the [Next] button in the screen of step 5.
8
Click the [Finish] button.
9
Click the [Close] button in the screen of step 2.
(2) (3)
(1)