Sharp MX-M502N

7-110
SYSTEM SETTINGS
Contents
Recall in Case of Line Busy
This program is used to set the number of recall
attempts and the interval between recall attempts when
a transmission is not successful due to the line being
busy or other reason.
Number of Times to Recall When Line is Busy
This setting specifies whether or not recalling is
performed when the line is busy. When recalling is
performed, you can set the number of recall attempts.
Interval to Wait Between Recall Attempts (min.)
When Line is Busy
The interval between recall attempts can be set.
The number of recall attempts and the interval between
attempts that can be set in each country are shown in
the following table.
Country Differentiation Table
Recall in Case of Communication Error
This determines how many times your machine will
automatically re-attempt the call if a fax transmission
fails due to a communication error.
Number of Times to Recall in Case of Error
Specify how many times the machine will re-attempt the
call when a communication error occurs.
Interval to Wait Between Recall Attempts (min.) in
Case of Error
The interval between recall attempts can be set.
The number of recall attempts and the interval between
attempts that can be set in each country are shown in
the following table.
Country Differentiation Table
The number of
recall attempts
The interval
between
attempts
United Kingdom,
France,
Germany,
Sweden, Italy,
Spain,
Netherlands,
Saudi Arabia,
South Africa,
Hungary, Czech
Republic,
Slovakia,
Poland, Greece,
Russia
1 to 10
(default: 2)
any number of
minutes from 1
to 15
(default: 3)
Canada 1 to 14
(default: 2)
Australia,
New Zealand,
Singapore,
Thailand,
Malaysia, India,
Philippines
1 to 9
(default: 2)
Hong Kong 1 to 3
(default: 2)
Taiwan 1 to 15
(default: 2)
any number of
minutes from 4
to 15
(default: 4)
Indonesia 1 to 5
(default: 2)
When this setting is enabled, note that your machine
will not re-attempt a call when manual transmission or
direct transmission is used.
The number of
recall attempts
The interval
between
attempts
United Kingdom,
France,
Germany,
Sweden, Italy,
Spain,
Netherlands,
Saudi Arabia,
South Africa,
Hungary, Czech
Republic,
Slovakia,
Poland, Greece,
Russia
1 to 5
(default: 1)
any number of
minutes from 1
to 15
(default: 1)
Australia,
New Zealand,
Canada
1 attempt any number of
minutes from 1
to 15
(default: 3)
Singapore,
Thailand,
Malaysia, India,
Philippines
1 to 9
(default: 2)
any number of
minutes from 1
to 15
(default: 1)
Hong Kong 1 to 3
(default: 2)
Taiwan 1 to 15
(default: 2)
Indonesia 1 to 5
(default: 2)
any number of
minutes from 4
to 15
(default: 4)
When this setting is enabled, note that your machine
will not re-attempt a call when manual transmission or
direct transmission is used.