Sharp MX-M623N - Page 12

DENSITY & GRADATION ADJUSTMENT
SHARP
12
PRINTER DENSITY CHECK:
Sim 64-05 [PCL Printer]
Sim 64-06 [PS Printer]
SERVICE TARGET SETTING:
Sim 63-07 [for Engine]
Sim 67-27 [for Printer]
Scan Test Pattern to Register Custom Service Target
DEFAULT SETTING (Service Mode):
To return machine to “Standard” setting:-
STANDARD SERVICE TARGET SETTING:
[Execute]
Sim 63-08 [for Engine]
Sim 67-28 [for Printer]
GREY BALANCE ADJUSTMENT:
Sim 46-24 [Engine]
Sim 67-24 [Printer]
SERVICE MODE
Place printed test pattern onto glass for both Copy &
Printer modes.