Sharp MX-M623N

JAM CAUSE CODES
SHARP
46
MAIN ENGINE
Code
Description
Code
Description
PPD_NT1
PPD not-reached JAM
(Tandem tray 1 feed paper)
PPD_SMF
PPD remaining JAM
(Manual feed tray feed paper)
PPD_NT2
PPD not-reached JAM
(Tandem tray 2 feed paper)
PPD_ST1
PPD remaining JAM
(Tandem tray 1 feed paper)
PPD_PRI
PPD JAM
(IMAGE_PREPARE request is
not sent from the ICU.)
PPD_ST2
PPD remaining JAM
(Tandem tray 2 feed paper)
PPD_SAD
PPD remaining JAM
(ADU refeed paper)
T1PPD_S
T1PPD remaining JAM
PPD_SLC
PPD remaining JAM
(LCC feed paper)
TRAY1
Tandem tray 1 paper feed JAM
(T1PPD not-reached)
PPD_SM1
PPD remaining JAM
(Multi-stage tray 1 feed paper)
TRAY2
Tandem tray 2 paper feed JAM
(MPRD1 not-reached)
PPD_SM2
PPD remaining JAM
(Multi-stage tray 2 feed paper)
LARGE CAPACITY CASSETTE
LCC
Side LCC paper feed JAM
(LPFD not-reached)
LPFD_SL
LPFD remaining JAM
(Side LCC feed paper)
DOCUMENT FEEDER
ICU_REQ
ICU factor stop JAM
SPPD2_S
SPPD2 remaining JAM
P_SHORT
Short size JAM
SPPD3_N
SPPD3 not-reached JAM
SPOD_N
SPOD not-reached JAM
SPPD3_S
SPPD3 remaining JAM
SPOD_S
SPOD remaining JAM
SPPD5_N
SPPD5 not-reached JAM
SPPD1_N
SPPD1 not-reached JAM
SPPD5_S
SPPD5 remaining JAM
SPPD1_S
SPPD1 remaining JAM
SPSD_SCN
Exp. start notification time end
SPPD2_N
SPPD2 not-reached JAM
STOP_JAM
Emergency stop JAM
INSERTER
H_SEN_NB
Reverse sensor not-reaching
JAM (When discharging from
the reverse path)
HI_SEN_S
Paper exit remaining JAM
H_SEN_NF
Reverse sensor not-reaching
JAM (When entering the
reverse path)
REG_SEN_N
Registration sensor not-reached
JAM
H_SEN_SB
Reverse sensor remaining JAM
(When discharging from the
reverse path)
REG_SEN_S
Registration sensor remaining JAM
H_SEN_SF
Reverse sensor remaining JAM
(When entering the reverse
path)
TIM_SEN_N
Timing sensor not-reached JAM
HI_SEN_NI
Paper exit not-reached JAM
(When feeding paper from the
inserter.)
TIM_SEN_S
Timing sensor remaining JAM
HI_SEN_NP
Paper exit not-reached JAM
(When feeding from the M/C)