32
MAC OS X
15
Display printer information.
(1) Click the machine's name.
(2) Click [Show Info].
If you are using Mac OS X v10.2.8, select [Show
Info] from the [Printers] menu.
16
Select the machine configuration.
If you selected [Auto Select] in (3) of step 14, the
machine configuration is detected and automatically
configured. Check the configured settings to make sure
they are correct.
(1) Select [Installable Options].
(2) Select the options that are installed on
the machine.
(3) Click the [Apply Changes] button.
(4) Click to close the window.
This completes the configuration of the printer
driver.
You can check the options that are installed on the
machine by printing out the "All custom setting list" in
the system settings. Follow these steps to print out the
"All custom setting list": Press the [SYSTEM
SETTINGS] key, touch the [LIST PRINT] key, and
then touch the [ALL CUSTOM SETTING LIST] key.
(1)
(2)
(1)
(3)
(2)
(4)
!mx7000_us_ins.book 32 ページ ２００６年１０月１８日 水曜日 午前１０時３３分
To Next Page
Loading...
Need help?
General
