38
6
Re-insert paper guide D at the desired
paper size.
7
Adjust the paper size selector knob to
the new paper size.
8
Fan the paper.
Fan the paper well before loading it. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
9
Insert the paper in the tray so that it
goes against the left side of the tray.
Load paper face up. The stack must not exceed the indicator
line (up to 1000 sheets in tray 5 or tray 6, or up to 2550 sheets
in tray 7).
10
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine.
If you loaded a different type of paper than was loaded previously, change the paper type setting as explained in
"PAPER TRAY SETTINGS" (page 80) in the System Settings. If the paper size setting is not configured correctly,
automatic paper selection will not operate correctly and printing may take place on the wrong size or type of paper or
a misfeed may occur.
Do not place heavy objects on the tray or press down on the tray.
(D)
To Next Page
Loading...
