To Next PageTo Next PageWhat to do if original misfeeds in Sharp All in One Printer automatic document feeder?
If the original misfeeds in the automatic document feeder, ensure the stack of paper in the tray is not higher than the indicator line. When scanning a long original, set the scan size to [Long Size]. If the original is on thin paper, use the document glass or slow scan mode in the special modes.
What to do if transmission does not take place on my Sharp MX-M850 due to file size?
If your administrator has set a limit on the size of transmitted files, a file that exceeds the limit cannot be transmitted. Check with your administrator. Reduce the size of the file attachment by reducing the number of pages scanned or by scanning using a lower resolution setting. You can also ask your mail server administrator what the file size limit is for one e-mail transmission. If the destination folder is not configured as a shared folder, select "share" in the folder properties. If the folder was moved or otherwise changed, the "share" setting may have been canceled.
What to do if my Sharp All in One Printer transmitted fax prints out blank at the receiving side?
Ensure the original is placed correctly (face up or face down, as required by the sending method) and send the fax again.
Why does my Sharp MX-M850 All in One Printer not print after reception?
If a message appears on the display indicating that you need to add toner or paper, printing will not be possible. Restore printing capability by following the instructions provided in the message.
Why is the scanned image clipped on my Sharp MX-M850?
The original scan size setting might be smaller than the actual original size. Set the scan size to the actual original size. If you have intentionally set a smaller size than the actual original size, note carefully the placement position of the selected scan size when placing the original.
Why Sharp All in One Printer does not automatically select the original size?
If the original size is not automatically selected or the wrong size is selected, straighten the original if it is curled or folded. Original sizes smaller than 5-1/2" x 8-1/2" (A5) cannot be detected, so enter the original size manually.
Why does Sharp All in One Printer leave smudges on printed output?
Smudges on printed output may occur if you are not using SHARP-recommended paper. Using unsupported paper can result in smudges. Also, if printing on pre-punched paper, the image may overlap the punch holes, causing smudges. If a message appears indicating the need for maintenance, contact your dealer or nearest SHARP Service Department as soon as possible.
How to fix lines in scanned images from Sharp All in One Printer?
If lines appear in the scanned image, clean the scanning areas of the document glass or automatic document feeder. Also, clean the surface of the bypass feed roller.
Why can't I specify a destination on my Sharp MX-M850?
Some functions may have been disabled in the system settings (administrator). Check with your administrator. When user authentication is enabled, the functions that you can use and page counts may be restricted in your user settings. Check with your administrator.
Why does auto selection of the color mode not take place correctly on my Sharp MX-M850 All in One Printer?
When the color mode is set to "Auto", the machine detects whether the original is black and white or color when the [START] key is pressed; however, automatic detection may not give the correct result. In this event, specify the color mode manually.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Connectivity | Ethernet, USB |
| Copy Resolution | 600 x 600 dpi |
| Functions | Copier, Printer, Scanner |
| Print Speed | 85 ppm |
| Scanner Type | Color |
| Display | 10.1-inch color touch-screen |
| Hard Drive | 320 GB |
| Scan Resolution | 600 dpi |
| Copy Speed | 85 ppm (black) |
| Network Connectivity | Ethernet (10Base-T/100Base-TX/1000Base-T) |
| USB Connectivity | USB 2.0 |
| Operating Systems Supported | Windows |
Identifies and describes all physical parts of the machine and its peripheral devices.
Details the function of each key and indicator on the machine's operation panel.
Explains the layout and functions of touch keys for easy operation and mode selection.
Describes methods for logging into the machine and securing access via user authentication.
Explains how to register and use frequently accessed functions as shortcuts on the home screen.
Provides instructions on how to place originals using the automatic document feeder or document glass.
Guides on how to load paper into various trays, including tray names and paper orientation.
Details different output finishing functions like sort, group, and offset for processed documents.
Explains the main screen layout and selection of copy settings in copy mode.
Outlines the fundamental steps for performing a copy job.
Instructions for creating automatic 2-sided copies from single-sided originals using the ADF.
Guides on using the bypass tray for copying on special media like recycled paper or envelopes.
Details how to select exposure levels and image types for optimal copy clarity.
Explains automatic enlargement/reduction to fit the original image onto the selected paper size.
Covers using preset ratios or zoom to adjust the size of copied images.
Function to print only the first set of copies for review before printing the entire batch.
Details finishing functions applicable to copy output, such as sorting and stapling.
Allows temporary interruption of a print job to perform a higher priority copy job.
Enables saving and retrieving frequently used copy settings as job programs for efficiency.
Introduces various special modes that offer advanced copying capabilities and effects.
Provides guidance on how to select and configure specific special modes for copying.
Highlights useful functions that enhance copying, such as margin shift and pamphlet creation.
Explains the fundamental steps for printing documents using the printer driver.
Guides on accessing help within the printer driver properties window for setting explanations.
Details how to print files from applications like TextEdit on Macintosh systems.
Describes how to cancel a print job initiated directly from the machine's operation panel.
Guides on configuring various print settings like paper size, orientation, and layout within the driver.
Covers advanced printing features like 2-sided printing, fit-to-page, and N-up printing.
Introduces the image send function and its various modes like Scan to E-mail, FTP, and Fax.
Details the main screen for image sending operations and mode selection.
Explains the basic procedure for scanning originals to send via e-mail or other methods.
Provides the basic procedure for sending faxes from the machine.
Covers efficient methods like one-touch keys and search number sending for transmissions.
Guides on saving destinations in the address book for quick retrieval and use.
Enables sending the same image to multiple destinations in a single operation.
Details how to change exposure and select original image types for scanned documents.
Explains how to set the scan resolution to improve image clarity.
Guides on changing the file type and compression method for scanned images.
Introduces special modes for advanced image sending tasks.
Provides instructions on selecting and configuring specific special modes for image sending.
Highlights helpful image sending functions like erasing shadows and dual page scanning.
Explains the document filing function for storing and managing documents on the hard drive.
Describes the easiest method to save a file without specifying detailed settings.
Guides on adding file names, user names, and folders when saving files.
Explains how to save documents to the hard drive without printing or transmitting.
Details how to retrieve and print files that have been stored on the machine's hard drive.
Details the base screen and options for manual finishing tasks like stapling and punching.
Provides a step-by-step guide on using manual finishing, using stapling as an example.
Introduces system settings for adjusting machine operations to suit workplace needs.
Presents the structure and available items within the machine's system settings menu.
