Sharp MX-M850 - Broadcast Transmission

76
■ Paper Tray Settings
*1 When large capacity trays / large capacity tray are installed
*2 When large capacity trays are installed
*3 When an inserter is installed.
■ USB-Device Check
■ User Control
* When user authentication is enabled and the logged-in user does not have the authority to configure the system settings
(administrator) (excluding factory default users).
Item Factory default setting Page
■ PAPER TRAY SETTINGS
80
● TRAY SETTINGS
80
X Tray 1 Plain, 8-1/2" x 11"
X Tray 2 Plain, 8-1/2" x 11"
X Tray 3
Plain, Auto-Inch
X Tray 4
X Tray 5*
1
MX-LCX4: Plain, 8-1/2" x 11"
MX-LCX5: Plain, Auto-Inch
MX-LCX6: Plain, 8-1/2" x 11"
MX-LCX3N: Plain, 11" x 17"
X Tray 6*
2
MX-LCX4: Plain, 8-1/2" x 11"
MX-LCX5: Plain, Auto-Inch
X Tray 7*
2
MX-LCX4: Plain, 8-1/2" x 11"
MX-LCX5: Plain, Auto-Inch
X Bypass Plain, Auto-Inch
X Inserter (Upper Tray)*
3
Plain, Auto-Inch
X Inserter (Lower Tray)*
3
Plain, Auto-Inch
● PAPER TYPE REGISTRATION – 84
● AUTO TRAY SWITCHING Enabled 84
Item Factory default setting Page
■ USB-DEVICE CHECK
–
84
Item Factory default setting Page
■ USER CONTROL*
85
● MODIFY USER INFORMATION – 85