Sharp Plasmacluster DW-J27FV - Page 7

EN-5
ENGLISH
OPERATION PANEL
FRONT DISPLAY
1
Power ON/OFF Button
8
H.SWING Button, Indicator Light
2
MOLD CONTROL Button, Indicator Light
9
ON/OFF TIMER Button
3
AIR PURIFY Button, Indicator Light
10
FILTER RESET Indicator Light
4
LAUNDRY Button, Indicator Light
11
INTERNAL DRY Indicator Light
5
DEHUMIDIFY Button, Indicator Light
12
Child-Lock Indicator Light
6
HUMIDITY SELECT Button
13
Light Sensor
7
V.SWING Button, Indicator Light
1
Humidity / Temperature / PM2.5 Monitor
Indicates the approximate humidity level or
temperature or PM2.5 level in the room.
Timer Monitor
Indicates setting time or remaining time of ON/
OFF timer.
HUMIDITY SELECT Monitor
Indicates setting humidity of HUMIDITY
SELECT mode.
6
Odor Indicator Light
Indicates the Odor Sensor detects odors.
OFF Orange Red
Clean Impure
7
Dust Indicator Light
Indicates the Dust(sensitive) Sensor detects
usual dust.
OFF Orange Red
Clean Impure
8
PM2.5 Indicator Light
Indicates the Dust(sensitive) Sensor detects
microscopic dust.
OFF Orange Red
Clean Impure
9
DEFROST Indicator Light
Indicates the Main Unit operates the
DEFROST mode.
10
Cleanliness Monitor
Indicates the air purity of the room in 3 levels
with color changes.
Blue Yellow Red
Clean Impure
When mold control mode
It will indicate with Purple.
2
Plasmacluster Ion Indicator Light
(Blue)
3
OFF Timer Indicator Light
4
ON Timer Indicator Light
5
Tank FULL Indicator Light
(Red)
Blinking when the Water Tank is Full.
16910 23457
13 12 11
8
12345678
910
Humidity 20% to 90% is displayed.
Temperature 0
o
C to 5 0
o
C is displayed.
PM2.5 Density 10μg/m
3
to 499 μg/m
3
is displayed.
20%
or less
90%
or more
50
o
C
or more
500μg/m
3
or more
-1
o
C
or less
9μg/m
3
or less
Press the button with " " to start.