EasyManuals Logo

Sharp PN-65HC1-LCD Setup Manual

Sharp PN-65HC1-LCD
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4
E
MOUNTING PRECAUTIONS
This product is for indoor use.
A mounting bracket compliant with VESA specifications is
required.
Since the monitor is heavy, consult your dealer before
installing, removing or moving the monitor.
Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
Use the monitor with the surface perpendicular to a level
surface.
When moving the monitor, be sure to hold the handles or
the parts marked by
below. Do not grasp the screen
or tray. This may cause product damage, failure, or injury.
[PN-86HC1]
[PN-75HC1]
This monitor should be used at an ambient temperature
between 41°F (5°C) and 95°F (35°C). Provide enough
space around the monitor to prevent heat from
accumulating inside.
Unit: inch [mm]
7-7/8 [200]
2 [50]
2
[50]
2
[50]
1-7/16 [35]
If it is difficult to provide sufficient space for any reason
such as the installation of the monitor inside a housing or
of several units side-by-side, or if the ambient temperature
may be outside of the range of 41°F (5°C) to 95°F (35°C),
install a fan or take other measures to keep the ambient
temperature within the required range.
Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
Do not place the monitor on a device which generates heat.
Do not use the product in locations where the unit is
exposed to direct sunlight or other strong light. Since this
product operates with infrared rays, such light may cause a
malfunction.
When using multiple monitors closely, be sure the infrared
transmitter/receiver does not affect the other ones.

Other manuals for Sharp PN-65HC1-LCD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp PN-65HC1-LCD and is the answer not in the manual?

Sharp PN-65HC1-LCD Specifications

General IconGeneral
BrandSharp
ModelPN-65HC1-LCD
CategoryMonitor
LanguageEnglish

Related product manuals