Sharp PN-80TC3 - Default Pen Settings

PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 38
■Right-click Setting (Mouse Mode)
Recognize press and hold as right click
Set whether touching the screen continuously is used as a mouse right-click.
Press and Hold Duration
Set the time that is recognized as a mouse right-click.
Press and Hold Effective Range
Set the effective range for determination that the screen is being touched continuously.
■
Operation Setting
Touch Mode
Select the touch mode (Mouse Mode or Multi-Touch Mode).
- Mouse Mode : Touch information is output as mouse information.
- Multi-Touch Mode : Touch information is output as digitizer information.
■
Uninstall
(CAUTION)
- This can only be done by a user with administrator authority.
1. Click the touch panel settings tool icon ( ) on the taskbar and click “Exit”.
- If a confirmation window appears, click “Yes”.
2. Disconnect the USB cable.
3. Select “Control Panel” from the “Start” menu.
4. Click “Uninstall a program”.
- If you are using icon view (Classic View), double-click “Programs and Features”.
5. Select “SHARP Touch Panel Settings Tool” and click “Uninstall”.
- Follow the on-screen instructions.
- When the “User Account Control” screen appears, click “Yes” (or “Allow”).
- When the “The following applications should be closed before continuing the install” message appears, click “OK”.
This completes the uninstallation.