Sharp PN-E601 - Menu Item Details: Screen and Picture; SCREEN Menu Item Explanations; PICTURE Menu Item Explanations

8
E
Connecting Peripheral Equipment
Caution
• Besuretoturnoffthemainpowerswitchanddisconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Becarefulnottomixuptheinputterminalwiththeoutput
terminal when connecting cables. Mixing up the input and
output terminals may cause malfunctions and the other
problems.
TIPS
• Imagesmaynotbedisplayedproperlydependingonthe
computer (video card) to be connected.
• Ascreenwith1920x1080resolutionmaynotbe
displayedcorrectlyonPCRGB.Inthiscase,checkthe
settings of your computer (video card) to verify that input
signalsconformtospecicationsofthismonitor.(See
Specications.)
• IfthereisacheckboxtodisableEDIDindisplaycontrol
panel,checkitwhenusingPCRGB.
• UsetheautomaticscreenadjustmentwhenaPCscreen
isdisplayedforthersttimeusingPCD-SUBorPCRGB,
or when the setting of the PC is changed. The screen is
adjusted automatically when SELF ADJUST in the OPTION
menu is set to ON.
• Iftheaudiooutputfromtheplaybackdeviceisconnected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor’s audio input, and
connecting the monitor’s audio output to the speakers or
other devices.
• Theaudioinputterminalsusedineachinputmodeare
factory-set as follows.
Input mode
Audio input terminal
(Factory setting)
PCD-SUB,PCDVI-D,
PCRGB
Audio input terminal
AV DVI-D Audio1 input terminal
AV COMPONENT,
AV S-VIDEO, AV VIDEO
Audio2 input terminal
PC HDMI, AV HDMI PC/AV HDMI input terminal
Connection with a PC or AV equipment
1. PC/AV HDMI input terminal
• UseacommerciallyavailableHDMIcable(conformingto
the HDMI standard) for PC/AV HDMI input terminal.
• SetHDMIofINPUTSELECTontheOPTIONmenu
according to the device to be connected.
• SelecttheaudioinputterminaltobeusedinPCHDMI
or AV HDMI of AUDIO SELECT on the OPTION menu.
WhenHDMIisselected,connectiontotheaudioinput
terminal is unnecessary.
2. PC D-sub input terminal
• WhenthePN-ZB01(optional)isattached,selecttheaudio
inputterminaltobeusedinPCD-SUBofAUDIOSELECT
on the OPTION menu.
3. Audio input terminal
• Useanaudiocablewithoutresistance.
• WhenthePN-ZB01(optional)isattached,settheaudio
input terminal used for each input mode in AUDIO
SELECT on the OPTION menu.
4. Audio output terminals
• Theoutputsoundvariesdependingontheinputmode.
• Thevolumeoftheoutputsoundcanbexedbysetting
AUDIO OUTPUT on the OPTION menu.
• Itisnotpossibletocontrolthesoundoutputfromthe
audio output terminals with the AUDIO menu.
5. RS-232C input terminal
RS-232C output terminal
• YoucancontrolthemonitorfromaPCbyconnectinga
commercially available RS-232 straight cable between
these terminals and the PC.
When the PN-ZB01 (optional)
is attached
1312146
5
3
42
811
7109
1
5