Sharp PN-HW751 - Attaching the USB Flash Drive Cover

15
E
Attaching the USB ash drive cover
1. Insert the USB ash drive into the USB port.
USB port
2. Attach the USB ash drive cover and secure with the provided screw (x1).
Screw
[PN-HW861/PN-HW751/
PN-HW551/PN-HW501]: Hole B
[PN-HW651]: Hole A [PN-HW431]: Hole C
Screw
ScrewHole B
Hole C
Hole A
TIPS
• If the USB ash drive cover will be attached, use a USB ash drive with dimensions no greater than 1-15/16 inch (50 mm) (L)
× 13/16 inch (20 mm) (W) × 1/2 inch (12 mm) (H).
• When a USB ash drive cover is attached, the depth of the monitor increase. (PN-HW651/PN-HW551/PN-HW501/
PN-HW431)