To Next PageTo Next Page
Need help?Do you have a question about the Sharp PN-HB851 and is the answer not in the manual?
General| Aspect Ratio | 16:9 |
|---|---|
| Panel Technology | LCD |
| Panel Type | IPS |
| Brightness | 500 cd/m² |
| Viewing Angle (H/V) | 178°/178° |
| Response Time | 8 ms |
| Backlight | LED |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Screen Size | 85 inches |
| Resolution | 3840 x 2160 |
| Input Terminals | DisplayPort x 1 |
| Output Terminals | HDMI x 1 |
| Built-in Speakers | Yes |
| Operating Humidity | 20% to 80% |
Details usage limitations, responsibilities, and conditions to avoid for safe and proper monitor operation.
Outlines continuous operation limits for HB Series and built-in Android features for HB/HM Series.
Specifies operating temperature ranges and necessary clearance space for optimal monitor performance and longevity.
Warns against direct sunlight, wind, and rain, detailing effects like brightness reduction and component deterioration.
Addresses the impact of dust on LCD panels and provides countermeasures, including enclosure and filter usage.
Explains methods to reduce reflected glare using AR or AG coating, and the importance of spacing for heat dissipation.
Details precautions against dew condensation, water drops, salt damage, and gases in the installation environment.
Covers preventing monitor damage from vibration, minimizing afterglow, and managing panel expansion.
Guides on appropriate power supply, circuit load distribution, and avoiding overconsumption during operation.
Details RS-232C/LAN connectivity, media devices, and recommendations for digital vs. analog cabling.
Explains the DisplayPort output for daisy-chaining up to 4 monitors and cable compatibility.
Addresses thermal issues, expansion, and hiding gaps between monitors in multi-display setups for proper airflow.
Presents case studies on optimizing space, airflow, and cooling solutions for multi-monitor installations.
Defines acceptable inclination angles (0-20 degrees) and introduces requirements for installations exceeding this range.
Details menu settings for installations over 20 degrees upward tilt and notes operational environment constraints.
Provides specific precautions for face-up installations, including temperature, clearance, and handling of protection panels.
Instructs on securely binding power cords and cables using provided clamps to prevent stress and damage.
Provides step-by-step instructions for safely opening the monitor's package with assistance.
Explains how to utilize the remote control to operate the monitor during the unpacking process while it's in the base box.
Details safe carrying methods, emphasizing landscape orientation, and provides worker positioning for lifting.
Guides on correct counterclockwise rotation for portrait installation and adjusting OSD indications.
Outlines requirements for mounting brackets, screw types, length, and tightening torque for secure attachment.
Advises on managing ambient temperature when installing PCs alongside monitors and recommends wireless peripherals.
Covers daily cleaning of the LCD surface and periodical checks of installation integrity and connections.
