Confidential
For use by Sharp authorized dealers
and distributors only.
Not for general distribution.
PN-HB851/HB751/HB651/HM851/HM751/HM651 Installation Guidelines <Rev1.0> April. 2019
29
Cleaning of LCD surface
•Please wipe the LCD surface lightly with a soft cloth (lens cleaner and gauze, etc.).
Please ensure that the surface is not damaged with a hard cloth and do not rub strongly .
•Please use a static electricity removal brush (dustproof brush) commercially available when dust attaches
to the LCD.
•Please do not wipe with a damp or dusty cloth, in order to protect the LCD.
3.7 Maintenance & checking items
Maintenance & Checking Items
1. Daily maintenance
1-1. Cleaning of LCD surface
1-2. Monitoring operating conditions
2. Periodical maintenance
2-1. Checking the installation conditions. Checking the mounting bracket for the main units,
for loose mounting bolts and screws, etc.
2-2. Checking the peeling off of black tape to maintain good looking appearance between panels
2-3. For wire hanging installation, check wire condition.
For safety use, both daily and periodical maintenance are necessary.
To Next Page
Loading...
