45
E
Administrator Settings Menu
Displaying the menu screen
Makes settings for this monitor.
Caution
• Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings.
Touch to operate.
1. On the home screen of APPLICATION mode, touch “Administrator Settings”.
• When you use Administrator Settings, a password is required. (Factory setting)
A screen for the input of the password appears.
• When you use Administrator Settings for the first time, a Set Password screen appears. Set a password.
2. Enter the password, and then touch “OK”.
To change the password, touch “Change the admin password”.
The Administrator Settings menu appears.
3. Set each item. (See page 46.)
4. Once the settings are complete, touch “Exit”.
To Next Page
Loading...
