12
E
Connecting Peripheral Equipment
6. Audio input terminal
• Use an audio cable without resistance.
• Set the audio input terminal to be used in AUDIO SELECT
on the SETUP menu.
7. Audio output terminal
• The output sound varies depending on the input mode.
8. RS-232C input terminal
9. RS-232C output terminal
• You can control the monitor from a computer by
connecting a commercially available RS-232 straight
cable between these terminals and the computer.
10. SD card slot
• This is used in APPLICATION mode. For details, see the
Software Guide.
11. USB port
• This is used in APPLICATION mode. For details, see the
Software Guide.
12. LAN terminal
• You can control the monitor from a computer on a network
by connecting a commercially available LAN cable
between this terminal and a network.
To Next Page
Loading...
