Sharp PN-ME432 - Page 2

2
Read This Manual before Attempting Firmware Update
This manual describes the procedure for updating firmware of monitor by using the HTTP server function.
For details on the HTTP server function, the names of the components of the monitor, the Display Menu
screen operations, and so on, refer to the instruction manual.
◼ Precautions
 Target models:
PN-ME432/PN-ME502/PN-ME552/PN-ME652
 Do not turn off the main power to the monitor or remove the LAN cable during firmware update.
 For details on making a connection to the monitor from a computer through a network, using the
HTTP server function of the monitor, read "LAN Control" in the instruction manual.
 This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions.
Please refer to the help files for the web browser to change the settings to use JavaScript and
Cookies.
 Updating the firmware does not affect any data set in the screen menu of monitor.
 After updating the firmware, the display settings will be reset under certain circumstances. Please
check the Update History on the FIRMWARE download page.
◼ Symbols
This manual uses the following symbols.
Note
Describes information that must be noted.
Tip
Provides supplementary explanations and useful information.