Sharp PN-ME432 - Page 3

3
Preparations for the Firmware Update
1. Get a firmware from FIRMWARE download page.
Download a firmware ZIP file from FIRMWARE download page.
Then unzip the ZIP file.
Tip
 A file name of the firmware ZIP file is listed as below.
Category
File name
Extension
ZIP file
PN-ME2-V****
.zip
 **** of ZIP file stands for a version number.
 When you unzip the ZIP file, a folder that includes a firmware image file will be created.
Category
Folder name / File name
Extension
Folder
PN_ME2_series
Firmware image
file
PN_ME2_series
.zip
 Do not change the extension of a firmware image file.
2. Connect a LAN cable to the monitor.