Sharp PN-R496

59
E
n
Power management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in
order for the monitor’s power management function to work.
DPMS: Display Power Management Signaling
DPMS Screen
Power
consumption
*1
Hsync Vsync
ON STATE Display
175 W
155 W
135 W
Yes Yes
STANDBY
No
display
2.5 W*
2
2.5 W*
2
2.5 W*
2
No Yes
SUSPEND Yes No
OFF STATE No No
DMPM: Digital Monitor Power Management
DMPM Screen
Power
consumption
*1
Monitor ON Display
175 W
155 W
135 W
Active OFF No display
2.5 W*
2
2.5 W*
2
2.5 W*
2
*1 Upper value: PN-R556, middle value: PN-R496, lower value: PN-R426.
*2 When SUPPLY USB POWER is set to POWER ON ONLY and no optional part is attached.
n
DDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been congured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
Specications