Need help?Do you have a question about the Sharp PN-V602 and is the answer not in the manual?
General| Contrast Ratio | 4000:1 |
|---|---|
| Viewing Angle | 178° (H) / 178° (V) |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Screen Size | 60 inch |
| Resolution | 1920 x 1080 |
| Brightness | 700 cd/m² |
| Response Time | 6.5 ms |
| Connectivity | HDMI, DisplayPort, DVI-D, VGA |
| Input Ports | HDMI, DisplayPort, DVI-D, VGA |
How to assign unique ID numbers to each monitor for identification and control in a daisy chain configuration.
Correct procedure for turning the main power on and off, and essential wait times between operations.
Guide on selecting the input source (e.g., PC, HDMI, AV) for displaying content on the monitor.
Explanations for SCREEN menu items like AUTO adjustment, CLOCK, PHASE, H/V-POS, and H/V-SIZE.
Details on PICTURE menu items including AUTO adjustment, BRIGHT, CONTRAST, TINT, COLORS, and SHARPNESS.
Instructions for scheduling monitor power on/off times and adjusting brightness at specified times.
Procedure for automatic screen adjustment for PC D-Sub and PC RGB inputs to ensure optimal display.
How to reset all monitor settings to factory defaults, with options for partial resets.
Disabling monitor buttons or remote control operations and controlling the visibility of on-screen display messages.
Instructions for connecting the monitor to a PC via RS-232C cable, including one-to-one and daisy chain setups.
Details on matching PC and monitor communication settings (baud rate, data length) and command formats.
How to assign unique ID numbers to each monitor for identification and control in a daisy chain configuration.
Explains commands like IDST (set ID) and IDSL (select monitor for next command) for targeted control.
Using repeater control to issue commands to multiple monitors simultaneously without assigning individual IDs.
Procedures for transferring, saving, activating, and checking GAMMA user data for color calibration.
Details on commands to control monitor power states, including standby and normal operation.
Commands for selecting different input sources like HDMI, DVI, D-Sub, and AV, with input terminal compatibility notes.
Commands to adjust screen parameters like auto-sync, clock, phase, position, size, and resolution.
Commands for adjusting picture settings such as analog gain, contrast, black level, tint, colors, and sharpness.
Commands to control audio settings including treble, bass, balance, and resetting audio parameters.
Commands for configuring OSD settings, monitor orientation, language, and power on delay.
Commands for setting date/time, selecting input modes, mapping audio signals, and checking input compatibility.
Instructions for configuring LAN settings like IP address, subnet mask, and DHCP client for network control.
Steps to resolve issues like no picture, no sound, reversed audio, and non-functional remote control.
Troubleshooting unstable video, incorrect PC/AV input display, and unresponsive control buttons.
Explains Power LED flashing patterns related to temperature alerts and procedures to address overheating issues.
Overview of the monitor's model, resolution, colors, pixel pitch, viewing angle, and input signal compatibility.
Table detailing supported PC resolutions, sync frequencies, and dot clock rates for DVI, HDMI, and Analog inputs.
Table listing supported AV resolutions and frequencies for DVI-D, HDMI, and Component inputs.
To Next Page
